Dual Fuel Range Cooker With 13amp Plug
Are you a home chef who loves the responsive cooking control of gas cooktops but wants an electric oven for baking? Find a dual fuel cooker that has the best of both worlds.
Gas cooktops are favored by many home chefs who have experience in the kitchen because of their superior temperature control. They also allow them to use advanced cooking techniques like charring. These stoves are expensive, particularly in the event that you require an additional gas connection and electrician for installation.
What is a 13amp plug?
If you have a dual-fuel range cooker (also called a gas and electric oven) you'll need an electrical outlet of 13 amps. The plug should be wired by a qualified electrician into the cooker ring.
This ensures that the current flowing through the plug does not exceed the limit of safety that could result in an electrical fire. The plug is equipped with an electric fuse that regulates the current. The fuse will blow when it is overloaded. This safeguards the appliance against an overload of electricity.
The fuse is rated at 13 amps, as indicated on the top of the plug. This indicates the maximum amount of current that the plug could pass without damaging the appliance or heating the socket. When replacing fuses, it is crucial to use the same amperage rating as the original. You risk overheating a socket if you replace a fuse that has a different rating.
Ceramic 13 amp fuses are very durable, and can withstand the high temperatures from an oven. Ceramic elements are also resistant to fire and is therefore a better option over other types.
There are a few different ways in which a 13 amp plug can be fitted. It may be wired to an existing live socket, and the flex is connected to it by an screw or a plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug has been firmly pushed into place.
Some plugs may have a diagram of wiring on cardboard over the pins and these should be removed prior to connecting the wires. It is essential that the wires are trimmed to the right length, as being too long can cause them to break when the plug cover is replaced. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I connect an outlet with 13amps?
The vast majority of dual fuel range cookers in UK are equipped with a 13 amp plug. This is crucial because ovens can draw large amounts of current, while normal plug sockets have a 10 amp rating.
Generally speaking new appliances should be equipped with an outlet at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not be connected to a plug and this is the reason why the problem occurs.
When connecting the cooker to an existing plug socket the first thing that needs doing is to ensure that the rating of the fuse inside the fuse box matches the plug's rating. This is very important because a fuse that is not properly sized could pose a risk.
It is also important to make sure that the fuse is seated within the cartridge and that there is no excessive movement within it. The next step is to prepare the flex to be used. First remove the sheathing from the flex, exposing the three insulated conductors within. Next nick black dual fuel range cooker at the entry point to the plug (beyond the cord grip) with a utility knife, without piercing the individual conductors that are insulated. This nick must be large enough to allow the cable and sheathing to separate as the sheathing is pulled back. Finally cut off the excess sheathing and leave approximately 40mm of length that extends beyond the flex end.
The flex should be positioned over the plug with the earth terminal on top and the live and neutral terminals at the bottom. The sheathing of each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then inserted to the terminal by using the cord grip. If the plug is fitted with a screw-type cord clamp, loosen this and then pull back the insulation to reveal the copper conductors. Finally, connect each of the conductors insulated to the proper terminal (starting with the earth before neutral, and then the live) using the channel that they run through the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 3kw at 230 volts is. This is a lot of power, but the standard fuse that comes with a UK plug will not fail until the cable reaches a hazardous temperature. A damaged plug or socket can result in a fire, so it's important to be aware of how much power you use, especially in the kitchen.
The fuse in plugtops is ceramic, around 25mm long and rated 240V mains. They will have an BS kitemark or similar marking on the side, and they contain sand. Alternatives to glass or plastic are available, but should not be used in conjunction with live plugs.
In the UK, most dual fuel range cookers are hard-wired. They are not able to be plugged directly into the wall outlet. They are typically connected through an exclusive cooker circuit, which is only suitable for appliances using up to 20 amps.
You can test the ring circuit in your home by checking the fuse box or by asking an electrician in your area. Ask whether the sockets are on the same ring or if they are separate. They will also be able to tell you if there is a dedicated circuit to power your oven.
The size of your kitchen will be one of the main factors when you are looking to buy a dual fuel range cooker. We offer a variety of cookers that can fit any space. Pick from compact 50-60cm dual-fuel models or vast 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.
We also have a broad selection of multi-function electric and gas cookers. These versatile machines let you cook a variety of meals, including casseroles, pasta and curries.
Currys offers a wide range of Cookers. Explore our online selection or stop by our store to view the range. We provide free home installation and delivery on a selection of range cookers and flexible payment options. Our staff is ready to answer any questions you have. You can contact us via email or by phone. Credit is subject to status and terms and conditions apply.
What is the most draw for an appliance switch?
There is plenty of confusion over what the maximum current draw of a cooker's switch is. The fact is, most cookers aren't made to plug into the standard socket, but instead are hard wired and fed into a dedicated oven ring circuit. This is due to the fact that they often consume far more than 20 amps of power when the electric oven and gas hob are in use.
There aren't any dual fuel range cookers that can be fitted in a standard socket, because this could create a significant fire risk and infringe electrical regulations. A professional electrician will always install any new electrical wiring to a cooker in the kitchen, and they will ensure that the total load (both the hob and oven) will not exceed the capacity of supply of the circuit.
The advantages of a dual fuel cooker are the receptive heating of a gas cooktop along with the precision of an electric oven. They are therefore a favorite among chefs as well as home cooks. Dual cookers with fuel ranges are ideal for trying out different cooking techniques, such as searing or grilling.
When buying an appliance for your kitchen, you'll need to take into consideration various aspects such as size, functionality and cost. You will also require gas connections in your home to allow the appliance. If you are unsure, it is best to make an appointment with a Gas Safe engineer to inspect your home prior to installing.
The Currys range of dual fuel range cookers offers options to suit a variety of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you are seeking something more sophisticated, we stock a variety of premium JennAir models, which feature several unique features.
It is essential to read the owner's guide before purchasing a dual-fuel range cooker. This will provide specific information regarding the gas and electrical requirements. You will need a gas connection in your home. A plumber may be required to set it up for you. You may also need a cooker-ring circuit that is installed by an experienced electrical engineer.